Changing the panel is very easy, you can
buy the sign panel only or the stand only. Great for
indoor display signage, the banner stands are popular and
very effective forms of indoor advertising Australia.
Step by Step:
- Remove the right hand side end cap.
- Under the cap, there is a small right angled pin.
Put this in your hand.
- Lift the sign to extend to the full length.
- Then, insert the pin into the roller system, there
is a small rotating hole for this.
- When the pin is inserted, the rewind action of the
banner stand is stopped.
- Undo the graphic from the lower fitting panel. Do
this by lifting away the protective tape, then carefully
removing the sign from the banner stand.
- Remove the top bar from the graphic. Roll up the
older banner for storage. Do not fold. Put in the banner
stand carry bag.
- Important: Reverse this process to add the new sign.
You must have both the stand
and top bar fitted, When secured, you can
remove the pin and slowly let the new sign design
retract into the banner stand. Replace the end cap.
|
Description: This photo shot of the
Banner Stand shows the extra strong top bar that makes
adding the new banner only very easy.
The unit has a magnetic end so that you can insert a small
pin into the retracting roller to stop the spring rewinding.
This is included in the base end cap. To change, simply stop
the winding mechanism with the pin and place the new banner
only onto the the sticking tape.
|